455211
Build your own intake manifold with these billet runners from MMR. Tapered port design increases performance on all applications. Thick bolt on...
$999.99... more info
444844
These Bolt on Block offs from MMR feature a Factory O ring seal for a leak free design! These are used with aftermarket ECU's that do not require...
$59.99... more info
502600
These Replacement Bolts from MMR will attach your alternator to the timing cover. Gone is the strangely long stud, replaced by a easy to use bolt,...
$18.99 Buy Now
444393
This kit is an upgrade over the bolt and flat washer sold by ARP! This kit from MMR was developed to support the crankshaft and Harmonic balancer on...
$69.99... more info
350020
This Exclusive kit from MMR features ARP 2000 Headstuds, Nuts, Washers and Assembly Lube for a simple installation! If you are building a serious...
$324.99... more info
455662
Bolt stretch in the valvetrain of a DOHC application robs power by allowing the cam to lift from the head without opening the valve. Unlike the...
$169.99... more info
777545
These ARP bolts replace the 1 time use Torque to Yield Bolts that attach the Hub/bearing to the Knuck or Spindle. Kit includes QTY 8 needed to...
$69.99 Buy Now
777546
ARP Bolts to Replace the 1 Time Factory Use Bolts that mount the sway bar brackets to the K-Member. QTY 4 included Fits: 2015-2023 Mustang...
$69.99 Buy Now
467591
This kit replaces the factory bolts on the timing chain guides and Primary chain tensioners, 4 bolts included for Hydraulic tensioners and 2 bolts...
$69.99... more info
400088
MMR's Billet Cylinder Head Block Dowels replace the factory rolled "split/spring" design. Includes set of 4. Designed for ALL Ford...
$39.99 Buy Now
777219
MMR's Billet Rear Upper Shock Mount is designed for the Motorsports Enthusiast looking for the very best Suspension components. Our shock...
$199.99 Buy Now
777143
MMR recognizes that to beat the guy next to you that you must take EVERY advantage possible. These Lightweight, 100% Carbon Fiber Radiator...
$169.99... more info
477191
These Billet aluminum limiter position the IMRC (intake manifold runner control) in the factory full open position. Perfect for...
$29.99... more info
455498
This part may save your engine!! The MMR cylinder head oiling modification ( oil balance lines ) joins the left and right cylinder head together with...
$119.99... more info
777419
These Billet Aluminum, black anodized Dogbone support brackets go on the underside of the trunk to support the GT350R and GT500 CFTP Wings. They...
$79.99 Buy Now
500455
Stronger Mounting bracket and attachment prevent failure associated with Factory Actuators. Perfect for when rebuilding your engine as these are a...
$37.99 Buy Now
468900
O rings for Heater tube fitting and Upper radiator hose/manifold on Front of cylinder heads Fits all 2011-2022 5.0/5.2 Engines
$14.99 Buy Now
777326
This Bolt kit from MMR replaces the Factory 1 time use (torque to yield) bolts. This kit has addressed the mis-alignment issue by including Chromoly...
$39.99 Buy Now
450486
Genuine Ford, Factory Equipment on all 5.2 GT350 & GT500 engines. Does not fit 2011-2017 5.0 Engines - ONLY Fits GT350 / GT500 cylinder heads with...
$499.99 Buy Now
777892
MMR's GT350 / GT350R & Mach 1 Hose adapters allow you to plumb both your TR-3160 transmission oil cooler and Differential oil cooler...
$139.99 Buy Now
444833
GT500, GT350 5.2 and Ford Gt supercar Oil squirter block-offs (alloy blocks) When running aftermarket forged pistons the factory piston squirters are...
$29.99 Buy Now
777150
IN STOCK - same day shipping available MMR has paired up with MCS to bring our Road Racers the highest quality Coil over kit on the market for the...
$4,999.99... more info
477300
Are you ready to take your Coyote / Voodoo Powered Ford to the next level? Then this Paddle shifted gearbox is for you! The ultimate upgrade...
$34,899.99 $33,899.99
Save: 3% off... more info
455478
MMR's Head Cooling Mod ( HCM ) for the 2011-2023 5.0 / 5.2 Coyote is designed to help eliminate hotspots in the #8 cylinder by...
$199.99... more info
467600
Simply the strongest sleeves for your Ford 5.0 / 5.2 Coyote / Voodoo block. Designed, manufactured and proven to handle over 2000HP using a...
$999.99 Buy Now