Categories
- Shortblocks ( Modular & Coyote )
- Longblocks (Modular & Coyote)
- Modular & Coyote Engine Parts
- 2V/SOHC
- 3V/SOHC
- 4V/DOHC
- 5.0 / 5.2 COYOTE / GT350 / GT500
- Blocks , Block Parts & Covers
- Bolts/Hardware
- Cooling System
- Gaskets/Seals
- GEN X Race shop
- Manifolds / Cylinder Heads
- Oil System
- Rotating/Balancers/Int parts
- Timing/Chains/Guides
- Valvetrain/Cams
- 6.2 Raptor / Truck
- 4.75 Liter Replacement Parts
- 1996-2004 Mustang GT Parts
- 2005-2010 Mustang GT Parts
- 96-14 DOHC / COBRA / SVT Parts
- 2011-2014 Mustang
- 2015-2017 Mustang
- 2007-2014 Shelby GT500
- 2016 - 2020 Shelby GT350
- 2018 + Mustang
- Ignition and electronics
- 2020+ Shelby GT500
- Body parts and carbon Fiber -
- Apparel, Decals, Gifts, Payments
- Autocross & Road Racing (S550)
- Tools
- Hose and AN Fittings
- Fuel system
- Head Porting & Engine Services
- Drivetrain
- 2.7 Ford Ecoboost
- Garage Sale!
- Specials ...
- New Products ...
Specials [more]

Ford Timing Chain & Guide kit for 5.4 2V w/cam sprockets
$399.99 $379.99
Save: 5% off
Save: 5% off

Ford Timing Chain Guide kit 5.4 2V F150 / Expedition / F250
$369.99 $339.99
Save: 8% off
Save: 8% off
GEN X Race shop

Products specific to the MMR Gen X Billet Blocks
450568

2011-2022 5.0 / 5.2 Coyote MMR Billet Primary Chain Tensioners
If you are building a 5.0 Mustang or F150 Coyote engine these are the upgraded tensioners that you need. The factory tensioners cannot hold up to the...
$289.99
450476
... more info

2011-23 Ford Mustang 5.0 Coyote MMR PIVOTING Billet Chain Guides
Constructed of Billet Aluminum vs the stock plastic, eliminates timing variation under high RPM and load. Reduces 6 degrees of forward/aft movement...
$199.99... more info
444812

Billet Chain Guide kit w/chains for Gen X Tall Deck
Complete Chain and guide kit with E85 / M1 Compatible wear strips (not shown) for MMR 351 / GEN X Tall Deck. Includes Gen X specific rear cover and...
$1,099.99
467891R

Billet Crankshaft gear for Gen X Crank & Most billet crankshafts
Billet Crankshaft gear with radius for Gen X crankshafts and Most aftermarket billet crankshafts. Not for use with stock/NON-Radiused crankshafts
$349.99
400929
... more info

Brisk Spark Plugs for Turbocharged / Supercharged Coyote Engines
Recommended for ALL 500HP+ Supercharger and Turbocharger Applications. Brisk's Silver Racing Spark Plugs are the best solution for high...
$10.99... more info
444810

Chain Guide Wear Strips for Gen X Tall Deck Billet Chain Guides
Set of 4 Primary Chain wear strips. Fits GenX Tall Deck Billet Guides only. Same as factory equipment on all Gen X engines. These are a wearable item...
$239.99
400340
... more info

Ford Modular Roller Bearing Thrust system 4.6 / 5.4
Another first from the Modular Innovators at MMR! This bolt on system replaces the factory multi-piece rear thrust bearing completely. This system...
$299.99... more info
485934

Forged Billet Alloy Connecting Rods for MMR Gen X Tall Deck
Forged Connecting Rods as used by the Worlds Fastest Nitro and Alcohol vehicles on the planet. As used by Team MMR in all of our Pro Mod and Outlaw...
$1,749.99
444811

GenX Primary Timing Chains for Tall Deck Billet Block
High Strength primary timing chains for MMR GenX Tall deck billet blocks. 2 Chains included.
$399.99
485900
... more info

MMR / Manley Gen X Ford Coyote Pistons
Designed by MMR and Manley to bring you the strongest piston for your Ford Coyote Engine. 2618 Forged Alloy with Full banded Skirt and the thickest...
$1,199.99... more info
430020

MMR 3000 9/16 to 1/2 4.6 / 5.4 / 5.0 Coyote Race Headstuds kit
MMR 3000 9/16" to 1/2" Race Head stud kit End head gasket failure on high HP 1500-4000HP Modular applications with this custom stud kit...
$589.99
676500
... more info

MMR 5.0 / 5.2 Ford Coyote Billet Cylinder Head Cam Caps
Broken Cam caps are common in performance applications due to the factory cast aluminum cam cap which is very weak along with a thin cross section....
$599.99... more info
603000
... more info

MMR 5.0 Coyote GEN X 4000HP Billet Shortblock (5.0 - 5.3 Liters)
MMR 4000HP Forged Shortblock for 2011-2023 5.0 / 5.2 Coyote Hundreds of hours of development, dyno testing and track testing bring you the most...
$27,999.99... more info
467890
Save: 42% off
... more info

MMR 5.0 Coyote GenX Dual Roller Secondary Chain & Sprocket kit
The new MMR GenX double row chain increases strength over 4 times that of a factory chain and the new MMR sprockets feature billet Steel construction...
$1,899.99 $1,099.99Save: 42% off
... more info
450011
... more info

MMR 5.0 COYOTE Mustang Copper head Gaskets
MMR Copper head Gaskets for 2011-2014 5.0 TiVCT Mustang and F150 Used by Team MMR in all race applications above 1400HP. Available with or without...
$299.99... more info
401118
... more info

MMR Billet ICX PRO Intercooled Manifold for ALL 5.0 / 5.2 Coyote
MMR's ICX PRO is the ultimate intake manifold for 2011-2021 5.0 / 5.2 and MMR Gen X 351 Coyote engines. Designed and Dyno Proven for use up...
$4,699.99... more info
401119
... more info

MMR Billet Intake Manifold 5.0 Coyote 2011 + Mustang GT / F150
The MMR Billet manifold is the ultimate in 5.0 / 5.2 engine induction for applications making 600HP and up. This manifold holds EVERY Coyote Engine...
$3,499.99... more info
400203
... more info

MMR Billet Steel Ford Coyote 5.0 / 5.2 / 5.8 Crankshaft
MMR Gen X Billet Steel Coyote Crankshaft Handles over 4000HP, Billet Steel construction, Gun drilled for reduced weight. Available in Multiple...
$5,699.99... more info
649901
... more info

MMR CNC Ported 2011 - 20 5.0 Mustang / F150 Race Cylinder heads
Are you looking for the same cylinder heads used on the MMR GenX crate engines and by the team MMR Pro Mods? Look no further: MMR Race Ported...
$5,999.99... more info
458360

MMR Ford 5.0 Coyote / Voodoo Dry sump Alloy Oil Pan
Built, designed and tested by the best in the World. The MMR Dry sump pan is a low profile pan with options of 2 or 3 Scavenge pick-ups. They also...
$499.99
351X
... more info

MMR Gen X 351X Billet Coyote Crate Engine
Hundreds of hours of development, dyno testing and track testing bring you the most revolutionary engine to hit the Motorsports World. In a short...
$46,999.99... more info
302X
... more info

MMR Gen X 302X Billet Coyote Crate Engine
No other Coyote engine Manufacturer has set more Coyote specific records and captured more championships in NMCA, NMRA and PSCA! In Pro-Mod Form this...
$35,999.99... more info
444802
... more info

MMR Gen X Billet Coyote Block TALL DECK
IN STOCK READY TO SHIP!! Hundreds of hours of development, dyno testing and track testing bring you the most revolutionary engine to hit the...
$13,999.99... more info
444800
... more info

MMR Gen X Billet Ford Coyote Block 5.0 / 5.2
Hundreds of hours of development, dyno testing and track testing bring you the most revolutionary engine to hit the Motorsports World. In a short...
$12,999.99... more info
444820
... more info

MMR Gen X Coyote Billet Timing Cover
100% Billet Construction, 15% Lighter than factory casting. Bolts on to factory 5.0 Coyote Engine or MMR Gen X short and tall deck engines (specify...
$1,799.99... more info
Your IP Address is: 44.201.92.114
Copyright © 2023 Modular Motorsports. Powered by Zen Cart