TRC
These easy to use piston ring compressors allow you to simply push the piston into the bore with zero effort to prevent damaged rings and making...
$102.99Select Options...
T9000
This great kit from MMR includes the basic tools for 5.0/5.2 Coyote engine dis-assembly and assembly. Kit Includes: Crankshaft turning Tool Camshaft...
$331.99Select Options...
T780
Harmonic Balancer Puller Kit for 93-2004 Modular engines 4.6/5.4 2V/4V Will remove all stock and aftermarket balancers - simple operation. Includes...
$51.99Select Options...
T740
Engine Stand bolt Kit Bolts all Modular engines to Most Engines stands (qty 4 bolts with washers)
$13.99Select Options...
T700
MMR Modular Crankshaft Turning Socket 4.6 / 5.4 / 5.0 / 5.2 Coyote TiVCT Required for engine building to turn crankshaft without damaging the crank...
$51.99 Buy Now
T5052
This socket tool is designed to prevent scratching/damaging the outside of the MMR Billet Canisters when tightening or removing them. This socket...
$40.99 Buy Now
T3000
MMR's 16" Large degree wheels are machined from a 1/4 in. thick billet aluminum plate. The large open design offers visibility to...
$199.99Select Options...
T2900
Due to the Long Reach / Deep Set spark Plug design it was impossible to find a Piston Stop Tool - until now - MMR went to work on this purpose...
$38.99 Buy Now
T2800
This high Precision tool manufactured by MMR is designed for repairing cam bores that are damaged, require cap replacement or are warped. This tool...
$1,499.00 Buy Now
T2000
This solid lifter from MMR is designed to be used when degreeing cams or checking Piston to valve clearance. EVERY home or shop engine builder should...
$32.99 Buy Now
T1974
MMR's Differential bushing tool is perfect for replacing your differential bushings. Easy to use design installs new bushings without causing and...
$115.99 Buy Now
T1900
Ford Modular & Coyote Cam timing degree kit Everything needed to time and properly degree any Modular or Coyote engine, Includes Adjustable...
$470.99Select Options...
T1850
This tool instantly locates TDC (top dead center) on all Ford 4.6, 5.4 & 5.0 Coyote engines. It can also be used for 4.6, 5.4/5.8 engines to...
$45.99 Buy Now
T1846
MMR's Engine lift plate installs in just seconds with the hardware provided. Made from Thick Billet aluminum plate it wont rust and features a...
$127.99 Buy Now
T1800
MMR's Engine lift plate installs in just seconds with the hardware provided. Made from Thick Billet aluminum plate it wont rust and features a...
$99.99 Buy Now
T1700
MMR spark plug tap for all 93-2010 2v/4v SOHC/DOHC - 2007-2014 GT500 & 2011-2022 5.0 / 5.2 TiVCT Cleans and chases factory spark plug...
$51.99 Buy Now
T1600
Great for removing and installing stubborn Harmonic Balancer bolts, flywheel & Flexplate bolts & Torque converter bolts. A tool that EVERY...
$50.99 Buy Now
T1470
This simple puller allows you to remove STOCK Harmonic Balancers from all 2005-2017 Mustang GT 3V and 5.0 Coyote engines. Lifetime warranty. This is...
$89.99Select Options...
T1450
Required to remove rear cover from all 4.6, 5.4, 6.2 and 5.0/5.2 Coyote engines. Fits 3/8" drive rachet or impact
$13.99 Buy Now
T1400
This Great tool from MMR is required to properly install 5.0 Coyote Camshafts in your Mustang GT , Boss , F150 or GT350. Unfortunately Ford didnt...
$89.99 Buy Now
T1350
Thread tap to repair or tap cylinder head exhaust flanges. Fits all 2010-2025 5.0 and 5.2L coyote / voodoo / predator Engines
$46.99Select Options...
T1275
MMR Pro Spring Compressor for 93-2013 2V and 4V ( SOHC / DOHC), 4.6 and 5.4, DOHC Mustang GT and Cobra, F150 and F250, Navigator Valve spring...
$254.99Select Options...
T1250
MMR 2005-2010 4.6 and 5.4 3V Mustang GT and F-150 valve spring compressor tool Lifetime warranty! Works with heads on vehicle!! Simple operation. No...
$292.99 Buy Now
T1200
MMR 2 V SOHC Valve Spring Compressor This great tool from MMR allows you to change Valve Springs, retainers and locks while the engine is in the...
$114.99 Buy Now
T1120
Great for cleaning damaged crankshaft threads. Long reach works on both 5.0 Coyote, GT500 and 4.6/5.4 applications with factory crankshafts.
$102.99 Buy Now
