210130A
This kit includes Super High Quality black oxide coated Allen Head re-usable bolts that hold the intake manifold to the cylinder head. Also Includes...
$53.99... more info
301800
Bolt kit for ALL Modular Transmissions/ALL Engines (QTY 7) Dont re-use those old stripped trans/bellhousing bolts, this new race kit from MMR wont...
$39.99 Buy Now
400012
Required for lubrication between bearings and moving parts, provides protection upon initial start-up until oil pump builds pressure, as used in all...
$17.99 Buy Now
400014
ARP 2000 Harmonic Balancer Bolt for all Mustang 4.6 and F150 / 5.4 Lightning The Factory harmonic balancer bolt is a torque to yield design and...
$49.99 Buy Now
400015
Factory Ford Crank Trigger Sensor
$49.99 Buy Now
400016
Fits 96-04 SOHC and DOHC 1 Required (2005-2008 Models require QTY 2)
$49.99 Buy Now
400020
ARP Head stud kit 96-14 Use this ARP Head studs kit with the MMR PN#400010 head gaskets for in ultimate sealing power, a must for all Power adder...
$319.99... more info
400025A
MMR Romeo Block (03-04 Cobra & Most Mustang GT) Racing Sidebolt & Washer kit Replace the factory 1 time use side Block bolts with this MMR...
$48.99 Buy Now
400025C
MMR TEKSID (93-98 Aluminum) Block Racing Sidebolt & Washer kit Replace the factory 1 time use side Block bolts with this MMR re-usable high...
$48.99 Buy Now
400025D
ARP Side bolts for Windsor Aluminum Blocks 98 1/2 to 2011 (also fits ford GT supercar block and 2011-2014 GT500). New Bolts (set of 20) FACTORY BOLTS...
$64.99 Buy Now
400025E
ARP Side bolts for Windsor 4.6 and 5.4 Iron Blocks (including GT500) New Bolts (set of 20) FACTORY BOLTS CANNOT BE RE-USED (they are a torque to...
$64.99 Buy Now
400025F
ARP Side bolts for CAST IRON BOSS Block FACTORY BOLTS CANNOT BE RE-USED (they are a torque to yield style) and must be replaced everytime they are...
$64.99 Buy Now
400026
Black oxide finished, high strength Allen bolt kit for all stock and aftermarket oil pans. Fits all 4.6, 5.4, 5.8 and 6.8 2V, 3V and 4V Does not...
$37.99 Buy Now
400027
Black oxide finished, high strength Allen bolts for all stock and aftermarket oil pumps. This Kit includes 5 Bolts due to Variances in Ford Engine...
$34.99 Buy Now
400028A
Black oxide finished, high strength Allen bolts for all 2V heads. (includes bolts for 1 pair of Heads)
$49.99 Buy Now
400029
1996-2014 4.6 / 5.4 / 5.8 Coyote ARP Rear Seal Housing / Cover bolts (QTY 6) Step up to these high quality, high strength, re-usable bolts for your...
$29.99 Buy Now
400030
ARP Main studs kit for all IRON blocks 4.6/5.4 Helps locate the main block caps better for more durability and performance in high HP...
$189.99 Buy Now
400030SI
ARP Main Stud Kit for 2007-2010 IRON Block with factory windage tray (10 pc kit) Includes all 10 Studs, washers and 12 pt nuts with ARP lube.
$199.99 Buy Now
400136
Oil Pump Pick-up tube stud Fits all Modular engines (does not fit Coyote engine)
$22.99 Buy Now
400331
MMR Header Bolts / Exhaust Manifold Bolt kit Works with all aftermarket headers and stock exhaust manifolds, Black Oxide finish. (replaces factory...
$49.99 Buy Now
400340
Another first from the Modular Innovators at MMR! This bolt on system replaces the factory multi-piece rear thrust bearing completely. This system...
$299.99... more info
420014
ARP 2000 Camshaft Sprocket retaining bolts 2V SOHC (qty 2) The Factory Camshaft bolt is a torque to yield design and is should only be used once....
$74.99... more info
420020
ARP 2000 Headstuds kit 96-04 Use this stud kit with the above head gaskets for ultimate sealing power, a must for all Power adder vehicles. Comes...
$399.99 Buy Now
430020
MMR 3000 9/16" to 1/2" Race Head stud kit End head gasket failure on high HP 1500-4000HP Modular applications with this custom stud kit...
$589.99 Buy Now
433105
These 2 bolts attach the Oil pump Pick-up tube to the the Oil Pump. Upgraded ARP brand can be used more than 1 time unlike the factory torque to...
$21.99 Buy Now