Inline Thermostat Housing / Bypass Ford 4.6 / 5.4 & 5.0 Coyote

MMR Inline Thermostat Housing/Bypass Line delete with 1/2 NPT Port

Can be placed in upper or lower radiator hose, great for removing complicated and bulky lower radiator hoses . Perfect for removing factory bypass lines or to add one. The port can be plugged or also be used for a coolant temp sensor if needed using a 1/2npt to 3/8npt reducer.



* For 1.5" Hose (in and out) or -16AN (in and out) OR COMBINATION
* Can be used to Adapt -16AN to 1.5" Hose
* 1/2 NPT Bypass or sensor port
* Leakfree O-ring design
* 100% Made in USA BY MMR
* Accepts traditional Thermostats/gaskets (not included) (Uses 54mm Thermostat such as STANT 13006 or 45356 & Gates 33616 rubber gasket)
* If you do not wish to use the port, it can be simply plugged using a 1/2 NPT plug fitting.
* Part easily unbolts for Thermostat installation or replacement
  • Model: 966542
  • Manufactured by: MMR

Starting at: $57.99

Please Choose:

Add Thermostat & Gasket






Add to Cart:
Your IP Address is: 34.232.51.240
Copyright © 2020 Modular Motorsports. Powered by Zen Cart