400012
Required for lubrication between bearings and moving parts, provides protection upon initial start-up until oil pump builds pressure, as used in all...
$17.99 Buy Now
400017
This Black silicone is recommended by MMR for all of the areas where sealant is required from the factory. Exceeds Factory requirements. Tube size is...
$7.99 Buy Now
400022A
This Lifter is needed to correctly degree and test valvetrain events. This lifter will also help determine Piston to Valve clearance when adding any...
$29.99 Buy Now
400022C
MMR Adjustable LIFTER for 4.6 / 5.4 2V, and 4V This Lifter is needed to correctly degree and test valvetrain events. This lifter will also help...
$44.99 Buy Now
400289
1993 to 2010 4.6/5.4 Harmonic Balancer Install Bolt 2V,3V and 4V (does not work for GT500 or MMR 4.75) This bolt is required to install ANY (factory...
$16.99... more info
400295
Ford Modular / Coyote MMR Compression Tester Kit. Complete, High quality kit, no other tools needed to complete a Compression Test. Fits: *93-2010 2V...
$49.99 Buy Now
400297
2011 - 2020 5.0 TiVCT Mustang GT / F150 harmonic balancer install bolt tool This bolt is required to install ANY (factory or aftermarket) harmonic...
$14.99... more info
451564
Lifetime warranty! Works with heads on vehicle!! Simple operation. Allows removal of 1 or 2 springs at a time. No other tools required!
$269.99... more info
738738
MMR's Remote Rev Module allows you to Rev your vehicle remotely with your phone. Features: Installation is plug and play NO WIRES TO CUT,...
$299.99 Buy Now
900985a
MMR Spark Plug Gapping tool This tool allows you to adjust the plug gap easily and safely in just seconds. Fits: 93-2010 2v/4v SOHC/DOHC...
$29.99 Buy Now
T1109
This great product from MMR allows you to chase/clean dirty cylinder head/block bolt threads . Can be turned with a wrench or impact gun to quickly...
$29.99... more info
T1120
Great for cleaning damaged crankshaft threads. Long reach works on both 5.0 Coyote, GT500 and 4.6/5.4 applications with factory crankshafts.
$79.99 Buy Now
T1200
MMR 2 V SOHC Valve Spring Compressor This great tool from MMR allows you to change Valve Springs, retainers and locks while the engine is in the...
$89.99 Buy Now
T1250
MMR 2005-2010 4.6 and 5.4 3V Mustang GT and F-150 valve spring compressor tool Lifetime warranty! Works with heads on vehicle!! Simple operation. No...
$229.99 Buy Now
T1275
MMR Pro Spring Compressor for 93-2013 2V and 4V ( SOHC / DOHC), 4.6 and 5.4, DOHC Mustang GT and Cobra, F150 and F250, Navigator Valve spring...
$199.99... more info
T1400
This Great tool from MMR is required to properly install 5.0 Coyote Camshafts in your Mustang GT , Boss , F150 or GT350. Unfortunately Ford didnt...
$69.99 Buy Now
T1450
Required to remove rear cover from all 4.6, 5.4, 6.2 and 5.0/5.2 Coyote engines. Fits 3/8" drive rachet or impact
$9.99 Buy Now
T1470
This simple puller allows you to remove STOCK Harmonic Balancers from all 2005-2017 Mustang GT 3V and 5.0 Coyote engines. Lifetime warranty. This is...
$69.99... more info
T1600
Great for removing and installing stubborn Harmonic Balancer bolts, flywheel & Flexplate bolts & Torque converter bolts. A tool that EVERY...
$34.99 Buy Now
T1700
MMR spark plug tap for all 93-2010 2v/4v SOHC/DOHC - 2007-2014 GT500 & 2011-2022 5.0 / 5.2 TiVCT Cleans and chases factory spark plug...
$39.99 Buy Now
T1800
MMR's Engine lift plate installs in just seconds with the hardware provided. Made from Thick Billet aluminum plate it wont rust and features a...
$69.99 Buy Now
T1846
MMR's Engine lift plate installs in just seconds with the hardware provided. Made from Thick Billet aluminum plate it wont rust and features a...
$69.99 Buy Now
T1850
This tool instantly locates TDC (top dead center) on all Ford 4.6, 5.4 & 5.0 Coyote engines. It can also be used for 4.6, 5.4/5.8 engines to...
$34.99 Buy Now
T1900
Ford Modular & Coyote Cam timing degree kit Everything needed to time and properly degree any Modular or Coyote engine, Includes Adjustable...
$369.99... more info
T2000
This solid lifter from MMR is designed to be used when degreeing cams or checking Piston to valve clearance. EVERY home or shop engine builder should...
$24.99 Buy Now
